智能控制理论与船舶系统综述

简要综述了智能控制的主要研究成果,分析了其在船舶系统中的应用领域,提出了几个重要的研究课题。     

NiCl_2-(CH_2)_6N_4·HCl-H_2O三元体系组成及热致变色性能研究

本文用相平衡法研究了NiCl_2—(CH_2)_6N_4·HCl—H_2O 三元体系在30℃的溶解度,测定了各液相的折光率。结果表明生成了复合物2NiCl_2·(CH_2)_6N_4·HCl·9H_2O.文中介绍了该三元体系在13°O 时平衡固相的热致变色性能,通过TG—DTA 研究初步探讨了热致变色机理。     

决策系统的信息机理

本文从信息与决策的角度,分析了决策系统信息特性的几个侧面,为研究信息对决策系统的作用机理做了一些基础性的定量工作。     

多自由度系统及结构非线性自由振动的摄动谐波平衡法

本文在谐波平衡法的基础上,引入摄动的思想,得出了解多自由度系统及结构的非线性自由振动的新方法。其解的形式为小参数和谐波的级数形式,因此,其解不会遗漏任何项,方程为线性的代数方程;利用线性变换,将系数矩阵变换为对角阵,一旦求出线性模态,就可得其解,比线性化迭代法优越得多。算例表明,本文方法对于小振幅有较高的精度,对于较大振幅其结果也是令人满意的。     

高可靠、强实时分布式系统的切换技术研究

本文首先给出某高可靠、强实时分布式系统及系统的两种切换方案的简要描述，然后对切换技术的实现进行讨论；最后，在建立强实时双工系统的可靠性模型基础上，对系统的两种切换方案进行分析与比较。研究结果表明：对于本系统，机组级切换优于结点机级切换，且可以减少程序的复杂度，提高系统的可靠性与实时性。     

Dynamic server assignment policies for assembly‐type queues with flexible servers

We seek dynamic server assignment policies in finite‐capacity queueing systems with flexible and collaborative servers, which involve an assembly and/or a disassembly operation. The objective is to maximize the steady‐state throughput. We completely characterize the optimal policy for a Markovian system with two servers, two feeder stations, and instantaneous assembly and disassembly operations. This optimal policy allocates one server per station unless one of the stations is blocked, in which case both servers work at the unblocked station. For Markovian systems with three stations and instantaneous assembly and/or disassembly operations, we consider similar policies that move a server away from his/her “primary” station only when that station is blocked or starving. We determine the optimal assignment of each server whose primary station is blocked or starving in systems with three stations and zero buffers, by formulating the problem as a Markov decision process. Using this optimal assignment, we develop heuristic policies for systems with three or more stations and positive buffers, and show by means of a numerical study that these policies provide near‐optimal throughput. Furthermore, our numerical study shows that these policies developed for assembly‐type systems also work well in tandem systems. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

信息战建模的分析与探讨

通过对信息战建模的分析与总结,指出了一个完善的信息战建模方法应具备的基本功能;给出了这种建模方法的结构流图,并分析了结构流图的构成.该方法建立的信息战模型,能有效地识别信息战的效果,对信息战的理论发展和具体实施都有较重要的指导作用.     

正弦波型直流无刷电动机位置伺服系统的变结构控制

在分析正弦波型直流无刷电动机数学模型的基础上,采用比例等速变速控制策略(PCV)设计控制器,应用于正弦波型直流无刷电动机位置伺服系统.仿真结果表明:与传统PI控制器比较,PCV控制策略可以明显改善系统的品质,并增强系统的鲁棒性.     

Analysis of decentralized multi‐product pull systems with lost sales

We study a pull‐type, flexible, multi‐product, and multi‐stage production/inventory system with decentralized two‐card kanban control policies. Each stage involves a processor and two buffers with finite target levels. Production stages, arranged in series, can process several product types one at a time. Transportation of semi‐finished parts from one stage to another is performed in fixed lot sizes. The exact analysis is mathematically intractable even for smaller systems. We present a robust approximation algorithm to model two‐card kanban systems with batch transfers under arbitrary complexity. The algorithm uses phase‐type modeling to find effective processing times and busy period analysis to identify delays among product types in resource contention. Our algorithm reduces the effort required for estimating performance measures by a considerable margin and resolves the state–space explosion problem of analytical approaches. Using this analytical tool, we present new findings for a better understanding of some tactical and operational issues. We show that flow of material in small procurement sizes smoothes flow of information within the system, but also necessitates more frequent shipments between stages, raising the risk of late delivery. Balancing the risk of information delays vis‐à‐vis shipment delays is critical for the success of two‐card kanban systems. Although product variety causes time wasted in setup operations, it also facilitates relatively short production cycles enabling processors to switch from one product type to another more rapidly. The latter point is crucial especially in high‐demand environments. Increasing production line size prevents quick response to customer demand, but it may improve system performance if the vendor lead‐time is long or subject to high variation. Finally, variability in transportation and processing times causes the most damage if it arises at stages closer to the customer. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Managing components for assemble‐to‐order products with lead‐time‐dependent pricing: The full‐shipment model

We study a component inventory planning problem in an assemble‐to‐order environment faced by many contract manufacturers in which both quick delivery and efficient management of component inventory are crucial for the manufacturers to achieve profitability in a highly competitive market. Extending a recent study in a similar problem setting by the same authors, we analyze an optimization model for determining the optimal component stocking decision for a contract manufacturer facing an uncertain future demand, where product price depends on the delivery times. In contrast to our earlier work, this paper considers the situation where the contract manufacturer needs to deliver the full order quantity in one single shipment. This delivery requirement is appropriate for many industries, such as the garment and toy industries, where the economies of scale in transportation is essential. We develop efficient solution procedures for solving this optimization problem. We use our model results to illustrate how the different model parameters affect the optimal solution. We also compare the results under this full‐shipment model with those from our earlier work that allows for multiple partial shipments. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007